A burst supply line, an overflowing tub, or a storm surge under the back door doesn't wait for business hours, and neither do we. Hirex Water Damage sends licensed technicians straight to your Park City address with extraction equipment already loaded and running.
Hirex Water Damage started because homeowners in Park City, UT kept telling us the same story: a national hotline picked up, put them on hold, and then subcontracted the job out to whoever was cheapest and closest. Every technician on our Park City roster is a Hirex Water Damage employee, not a gig-app contractor pulled from a random directory.
Each lead tech holds an IICRC Water Restoration Technician certification and has personally handled clean-water, gray-water, and contaminated black-water losses, so Water Damage Repair in Park City isn't a side service we tacked on — it's the reason the company exists. We carry full general liability coverage and are licensed to operate throughout Park City, UT, so you're protected from the moment our truck pulls into the driveway.
We keep a stocked warehouse inside Park City, UT so equipment never has to be trucked in from another region, which is the difference between a 45-minute arrival and a next-day one.
Talk to a Park City property manager who's lived through an overnight pipe failure and they'll tell you exactly why a crew that arrives already equipped matters — every extra minute is more water in the framing. That's the gap Hirex Water Damage was built to close, one Park City call at a time.
Water damage doesn't always look dramatic at first — some of the costliest Park City jobs we've handled began as a small, easy-to-miss problem. Here's what tells us a property needs professional attention rather than a mop and a fan:
Recognizing one of these signs early is the difference between a contained repair and a gutted room, so call our Park City team and get a straight answer on how urgent it is.
From a single soaked bedroom to a commercial building with three flooded floors, our Park City teams are equipped to scale up or down — nothing gets a cookie-cutter response.
We arrive with submersible pumps and truck-mount extractors that get standing water out of a Park City property before it soaks deeper into the subfloor. Every extraction job includes moisture mapping so we know exactly which materials are still holding water once the visible flooding is gone.
We place industrial dehumidifiers and air movers based on actual psychrometric calculations, not a standard equipment count per room, with daily drying logs so you can see the numbers improving, not just take our word for it.
For families in Park City, this covers flood-cut drywall removal, subfloor evaluation, and packing out salvageable belongings for cleaning, with clear photo documentation at every stage for your insurance claim.
For commercial Park City accounts, we assign a project lead, run crews after normal hours to reduce downtime, and bring equipment sized to the actual footprint — we know a flooded lobby or a leaking unit above tenants below has to move fast.
When a Park City job involves sewage backup, our team suits up in full PPE, applies EPA-registered antimicrobials, and safely disposes of porous materials that can't be saved.
Every Park City job includes a preventive antimicrobial application, and if we spot conditions that need full remediation we tell you plainly instead of quietly hoping it clears up.
Every Park City estimate is written and explained before work begins — no vague "we'll see how it goes" pricing.
Because our equipment cache sits inside Park City, UT, most Park City calls see a technician on-site in under 60 minutes.
We document everything with photos and moisture logs and work directly with your adjuster so you're not stuck translating restoration jargon.
We don't call a job finished until the moisture meter agrees, and if it doesn't, we return at no additional cost.
Tell our Park City dispatcher what's happening — we'll ask a few quick questions to send the right equipment on the first trip.
Our nearest available Park City crew is dispatched immediately with truck-mount extraction gear on board.
Extraction happens immediately, followed by a moisture survey that tells us precisely where the drying equipment needs to go.
We re-check moisture levels daily until materials hit dry standard, then hand you full documentation for your records or your insurer.
Our Park City technicians use moisture meters at the start and the end of every job, and the final number has to hit the dry standard before we leave. If a callback shows lingering moisture within 30 days of a completed job, we return and correct it at no additional charge.
You'll find that exact commitment printed on your Park City paperwork, not just mentioned over the phone. A repeat visit under this guarantee doesn't mean starting over — we pull the original moisture logs and pick up exactly where the last visit left off.
"Our water heater let go at midnight and a Hirex Water Damage tech was pulling water out of the hallway by 1am. Fast doesn't begin to cover it." — Danielle R.
"I didn't touch the claim paperwork once. They sent it straight to the adjuster with photos and moisture logs attached." — Marcus T.
"The drying logs they left behind actually made sense — I could see the numbers dropping every day until it was done." — Priya S.
"They worked overnight so our restaurant wasn't closed longer than it had to be. That mattered a lot to us." — Aaron W.
"Nobody wants to call about a sewage backup, but they walked me through the containment and PPE process calmly." — Lena G.
"The quote matched the final invoice exactly. No surprise charges tacked on at the end." — Sam O.
Most Park City dispatches are on-site within 60-90 minutes since our crews and equipment are based in-state, not flown or trucked in from elsewhere.
We always quote first. You'll see a written estimate for the Park City job before any drying equipment starts running.
Emergency extraction, structural drying, and sewage/contaminated water cleanup are all available 24/7 for Park City properties.
We build our paperwork specifically to match what adjusters need and will speak with your insurer on your behalf.
We rely on moisture meters and psychrometric readings, not a guess, before signing off on a Park City job as complete.
Yes, our Park City crews are trained and equipped for Category 3 blackwater response, including PPE and antimicrobial treatment.
Turn off the water supply if you can reach it safely, keep people and pets out of the flooded area, and don't run electrical devices near standing water.
We scale crews and equipment for commercial Park City accounts and assign a dedicated project lead for anything beyond a single unit.
Typical drying time runs 3-5 days for a Park City home, though a job that sat unaddressed longer can take longer to fully dry.
Mold isn't inevitable, but the window to prevent it is narrow, which is why we treat speed as part of the Park City service, not an upsell.
Yes, if moisture readings aren't at dry standard when we finish, or a callback shows lingering moisture within 30 days, we return at no extra charge.
Our Park City coverage extends through the zip codes shown here and into nearby Park City, UT communities.
Park City is our home base, and our reach extends across Park City, UT through a network of staged equipment and on-call technicians. If your address falls inside or near Park City, a Hirex Water Damage crew can typically respond the same day.
— Embedded service-area map for Park City, Park City, UTReach our Park City line directly and get a technician on the way today.
Call +1-844-833-1325